Guides - Cable Tv Channels
Cable TV Installation Instructions
The instructions that follow are generic in nature and are meant to serve only as guidelines. Refer to your TV owner's manual for specific instructions for your set. Your TV should be cable-ready and able to receive at least 80 cable channels. Report problems to ResComp at 626-4192.
- Connect the TV to the cable wall jack using a coaxial cable. If the TV has more than one input jack, select the one labeled "CABLE" or "CATV."
- Plug the TV power cord into an electrical outlet and turn the TV power on.
- Configure your set to receive CABLE or CATV signals. This is usually accessed through a MENU or SETUP option on the TV's remote control. Refer to your TV owner's manual for specific directions for your set.
- Program the TV to receive channels. This is usually accessed through the same MENU or SETUP option used above. Locate an option labeled AUTOPROGRAM and select it. The TV will search through all channels and program the working channels. Refer to your TV owner's manual for specific directions for your set.
|
Your TV should now receive all on-campus channels.
